Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) 설치 가이드
56
Cisco Regulatory Compliance and Safety Information for the Cisco ONS 15454 RAN Service Module
OL-12610-01
EMC Class A Statements/Warnings
EMC Class A Statements/Warnings
This section includes the EMC Class A statements and warnings for the Cisco ONS 15454 RAN Service
Module.
Module.
EMC Environmental Conditions
This equipment is intended to operate under the following environmental conditions with respect to
EMC:
EMC:
1.
A separate defined location under the user’s control.
2.
Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT K27.
Acceptable environmental parameters are listed in
In addition, if equipment is operated in a domestic environment, interference may occur.
FCC Class A
Modifying the equipment without Cisco’s authorization may result in the equipment no longer
complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use
the equipment may be limited by FCC regulations, and you may be required to correct any interference
to radio or television communications at your own expense.
complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use
the equipment may be limited by FCC regulations, and you may be required to correct any interference
to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
Canada – Class A
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil num
Cet appareil num
érique de la classe A est conforme à la norme NMB-003 du Canada.
Table 2
Environmental Parameters
Parameter
Range
Operating Temperature
32 to 104°F (0 to + 40°C)
Non-Operational Temperature
-40 to 185°F (-40 to + 85°C)
Operating Humidity
5 to 90% RH (non-condensing)
Operating Altitude
9,842.5 ft (3000 m) @ 104°F (40°C)
Operating Vibration
0.41 Grms, 3 to 500 Hz/2 hours per axis GR-63-CORE earthquake
resistance, Zone 4, shelf-level
resistance, Zone 4, shelf-level
Non-Operational Vibration
1.12 Grms, 3 to 500 Hz/30 minutes per axis
Operating Acoustics
<60 dBa