Cisco Cisco Prime Central 1.5 설치 가이드

Integrating SpiderNet with Prime Central

Procedure

Step 1

From the Fault Source Management portlet, click Add to add the Fault Source details.
The Add New Fault Source dialog box appears.

Step 2

Enter the Fault Source Type from the drop-down as SpiderCloud and specify the Fault Source details in the appropriate
fields.

Step 3

Click OK.
For more Information about how to add a Fault Source and the field descriptions, refer to the section Adding a Fault
Source in the

Prime Central 1.5 User Guide

After the SpiderNet Fault Source is added, SpiderNet is registered with Prime Central as a domain manager
instance.

Note

Configuring Prime Central as Trap Listener in SpiderNet to Receive Traps

Procedure

Step 1

Step 2

Create a SNMP Managers Group:

a) Choose Administration > Northbound Interface > New SNMP Manager Group.
b) Enter Prime Central details:

• In Port field, enter 1162 port number.

• In Host Names or IP Addresses field, enter Prime Central FM server hostname or IP address.

• Select Alarm Forwarding checkbox and in SNMP Version choose V2C. In Community, enter Public.

• Uncheck Enable the Heartbeat Trap check box, as this trap is not supported in Prime Central.

• Click OK.

Step 3

Configure Events:

a) Choose Administration > Fault Management > Events Configuration.
b) Select Forward to SNMP check box and choose Prime Central SNMP Manager group in the drop-down.
c) Click Save.

Step 4

Configure a Trap Target:

a) Choose Network Control > SN. Right click on SN , go to Show Configuration > Advanced > Event Management

> Target. Right click on Target, and click Add Target.

• Provide Target Index and click OK.

• Select SNMP Trap in newly created index and enable SNMP Trap. In IP Address field, enter Management Server

IP Address.