Руководство По Установке для Cisco Cisco Prime Central 1.5
Integrating SpiderNet with Prime Central
Procedure
Step 1
From the Fault Source Management portlet, click Add to add the Fault Source details.
The Add New Fault Source dialog box appears.
The Add New Fault Source dialog box appears.
Step 2
Enter the Fault Source Type from the drop-down as SpiderCloud and specify the Fault Source details in the appropriate
fields.
fields.
Step 3
Click OK.
For more Information about how to add a Fault Source and the field descriptions, refer to the section Adding a Fault
Source in the
For more Information about how to add a Fault Source and the field descriptions, refer to the section Adding a Fault
Source in the
After the SpiderNet Fault Source is added, SpiderNet is registered with Prime Central as a domain manager
instance.
instance.
Note
Configuring Prime Central as Trap Listener in SpiderNet to Receive Traps
Procedure
Step 1
Login to SpiderNet server GUI.
Step 2
Create a SNMP Managers Group:
a) Choose Administration > Northbound Interface > New SNMP Manager Group.
b) Enter Prime Central details:
b) Enter Prime Central details:
• In Port field, enter 1162 port number.
• In Host Names or IP Addresses field, enter Prime Central FM server hostname or IP address.
• Select Alarm Forwarding checkbox and in SNMP Version choose V2C. In Community, enter Public.
• Uncheck Enable the Heartbeat Trap check box, as this trap is not supported in Prime Central.
• Click OK.
Step 3
Configure Events:
a) Choose Administration > Fault Management > Events Configuration.
b) Select Forward to SNMP check box and choose Prime Central SNMP Manager group in the drop-down.
c) Click Save.
b) Select Forward to SNMP check box and choose Prime Central SNMP Manager group in the drop-down.
c) Click Save.
Step 4
Configure a Trap Target:
a) Choose Network Control > SN. Right click on SN , go to Show Configuration > Advanced > Event Management
> Target. Right click on Target, and click Add Target.
• Provide Target Index and click OK.
• Select SNMP Trap in newly created index and enable SNMP Trap. In IP Address field, enter Management Server
IP Address.
69