Cisco Cisco D9824 Advanced Multi Decryption Receiver 설치 가이드
Chapter 5 Web GUI Setup and Monitoring
146
OL-29015-01
Check the Reacquire Tuning & Channel List Only check box for the decoder to
tune back to the user configured input and frequency and re-acquire the PSI/SI
information back to the selected channel. Click OK.
tune back to the user configured input and frequency and re-acquire the PSI/SI
information back to the selected channel. Click OK.
Note: This operation can take several minutes, depending on the size of the network.
Viewing the Current Input Status
The Current Input Status section displays the current RF status.
The following table describes the Current Input Status information displayed:
Parameter
Description
Frequency (GHz)
The current downlink frequency, in GHz.
L band Frequency (MHz) The current L-Band frequency, in MHz.
Symbol Rate (Msym)
Symbol rate of the received signal, in Msymbols/second.
FEC Rate
The FEC (Forward Error Correction) rate of the received signal
(N/A, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 7/8, 8/9 or 9/10).
(N/A, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 7/8, 8/9 or 9/10).
Signal Status
Indicates whether the input signal is locked.
Locked - Indicates the receiver is locked to a carrier
with no valid content.
with no valid content.
Lock+Sig - Indicates the receiver is locked to a carrier
with valid content.
with valid content.
No Lock - Indicates the receiver is not locked to a
carrier.
carrier.
AFC (MHz)
Indicates the current Automatic Frequency Control count, in
MHz.
MHz.
Acquisition State
Displays Full if the SI and PSI tables have all been found.
Otherwise, it will display Degraded if there are missing tables or
None if no SI or PSI tables have been found.
Otherwise, it will display Degraded if there are missing tables or
None if no SI or PSI tables have been found.
Orbital Validation Status Displays the status of the last user orbital validation performed.
It displays Passed if the last orbital validation was successful or
None if a orbital validation was never performed. Otherwise, it
will display a reason for the failed validation.
None if a orbital validation was never performed. Otherwise, it
will display a reason for the failed validation.
Orbital Validation Date
Displays the last date and time that the user orbital validation
was performed, if applicable.
was performed, if applicable.