Cisco Cisco D9824 Advanced Multi Decryption Receiver 설치 가이드
Configuring Transport Stream Information
OL-29015-01
197
13 In the Instance field, enter the instance (1 to 64) of the service specified by
Category to configure. If an input service matches this type and instance, then
the Action will be applied.
the Action will be applied.
14 If Action is set to Map, enter the Output PID number (0 to 8192) in the Output
PID field.
15 Click Save.
16 Click OK.
16 Click OK.
To remove a PID mapping, click the radio button of the entry you want to
remove and click Delete.
remove and click Delete.
Synchronizing the Inputs
1 In the DPM Program Entry Setup table, each PE output can be synchronized to
1 In the DPM Program Entry Setup table, each PE output can be synchronized to
its input according to one of the four output modes. Select the program entry
you want to synchronize and then click Resynchronize or click Resynchronize
All to synchronize the inputs to the outputs according to the service assignments
only. The Confirm Resynchronization window is displayed.
you want to synchronize and then click Resynchronize or click Resynchronize
All to synchronize the inputs to the outputs according to the service assignments
only. The Confirm Resynchronization window is displayed.
2 Select whether you want to synchronize the PE output according to the services
and then the PIDs assigned to each service, services only, PIDs only, or to
synchronize using a template.
synchronize using a template.
Map Mode
Description
Resynchronize Program, PMT
PID, ES List & ES PIDs
PID, ES List & ES PIDs
The receiver will synchronize the PE output according to
the services and then the PIDs assigned to each service.
the services and then the PIDs assigned to each service.
Resynchronize ES List
The receiver will synchronize the PE output according to
the available input services only, and ignore the input to
output service PID mapping.
the available input services only, and ignore the input to
output service PID mapping.
Resynchronize ES PIDs
The receiver will synchronize the PE output according to
the input PIDs only, and ignore the service assignment
categories/names.
the input PIDs only, and ignore the service assignment
categories/names.
Resynchronize Template ES List
& PIDs
& PIDs
Allows you to preset the input to output mapping of a PE
according to the preset template. This is helpful in pre-
configuring any number of PEs for future use.
according to the preset template. This is helpful in pre-
configuring any number of PEs for future use.
3 Click OK.