Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split 설치 가이드
10
6 Verify the Forward Path RF performance for each port. Reference table below
for standard configurations and RF Insertion Locations.
FCM
Type
Type
RX Cable RF Insert
Node Port/Cable Connection
Physical Location
Port 1
Port 2/3
Port 4
Port 5/6
1x4
O O O 1
1
1
1
1
2x4
4 O O 1
4
4
1
1
4x4
4 3 2 1
4
3
2
1
Note:
“
Node Port/Cable Connection” number corresponds to the “Rx Cable
RF Insert” position when testing a specific port.
Additional FCM signal routes are defined in Cisco 1.2 GHz GS7000 Node
Installation and Operation Guide.
Installation and Operation Guide.
Reverse Path RF Verification
1 Install the RF module into the test GS7000 Node housing.
2 Attach a network analyzer RF Source cable to Node Output port of the RF
2 Attach a network analyzer RF Source cable to Node Output port of the RF
Amp module.
3 Connect the cable adapter (part number GS7K-SPLKT-CBL) from the
appropriate transmitter cable connector to the stealth meter or analyzer receive
port.
port.
4 Note that the Amplifier gain will be approximately 0dB in this configuration.
5 Verify the Reverse Path RF performance for each port. Reference table below for
5 Verify the Reverse Path RF performance for each port. Reference table below for
standard RCM configurations and RF output locations.
RCM
Type
Type
TX Cable RF Out
Node Port/Cable Connections
Physical Location
Port 1
Port 2/3
Port 4
Port 5/6
4x1
1 O O O
1
1
1
1
4x2
1 O 3 O
1
1
3
3
4x4
1 2 3 4
1
2
3
4
Note:
“
Node Port/Cable Connection” number corresponds to the “Tx Cable
RF Out” position when testing a specific port.
Additional RCM signal routes are defined Cisco 1.2 GHz GS7000 Node
Installation and Operation Guide.
Installation and Operation Guide.