Cisco Headend System Release 2.5 설치 가이드
Install GQAM Software onto the DNCS
4022900 Rev C
25
9 Complete one of the following options:
If the File Manager is present: From the File Manager window, click File
and select Eject. The CD is ejected from the CD drive and the File Manager
window closes.
If the File Manager is not present: From an xterm window, type the
following command: cd /.; eject; exit. The CD is ejected from the CD drive.
10 Type exit and press Enter to close the xterm window.
11 Go to
11 Go to
Establish a Download Sequence (on page 27).
Installing the GQAM Software from the FTP Server
Creating the Directory
1 From the xterm window where you are logged in as root, type
1 From the xterm window where you are logged in as root, type
cd /export/home/dncs/download and press Enter. The
/export/home/dncs/download directory becomes the working directory.
Important: If this directory does not exist, use the mkdir command to create it.
Important: If this directory does not exist, use the mkdir command to create it.
Then, repeat step 1.
2 Type mkdir GQAM42 and press Enter. The system creates a subdirectory called
GQAM42 in the /export/home/dncs/download directory.
3 Type cd GQAM42 and press Enter to access the GQAM42 directory.
4 Go to
4 Go to
Obtaining the GQAM Software File (on page 25).
Obtaining the GQAM Software File
1 Log on to the FTP server.
1 Log on to the FTP server.
Notes:
The address of the server is ftp.sciatl.com or 192.133.243.133.
Note: The address for the FTP server is subject to change. If you are unable to
Note: The address for the FTP server is subject to change. If you are unable to
reach the FTP server, please contact Cisco Services for the latest address.
The username is anonymous.
The password is the e-mail address of the person logging in.
2 Choose one of the following options to navigate to the directory in which the file
is located:
If you are outside our firewall, type cd /pub/scicare/RELEASED/GQAM
If you are inside our firewall, type
cd /external_pub/scicare/RELEASED/GQAM
3 Type bin and press Enter. The system sets the FTP transfer mode to binary.
4 Type hash and press Enter. The system configures itself to display hash marks
4 Type hash and press Enter. The system configures itself to display hash marks
that show file-transfer progress.