Cisco Headend Digital Broadband Delivery System 사용자 가이드
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
4002178 Rev C
Configuring SARA to Enhance Your Subscribers’ Experience
1-45
Build and Send a Configuration to All Set-Tops in a Single Hub,
Continued
Modifying a Hub Configuration
As the demands of your system change, you may need to change some of the
settings for this hub.
Complete the following steps to modify a hub configuration.
Complete the following steps to modify a hub configuration.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Click Hub.
Result: The DHCT Configure Prompt window displays a list of hubs in your
Result: The DHCT Configure Prompt window displays a list of hubs in your
network.
Note: Under the Configuration column, the window specifies whether the
Note: Under the Configuration column, the window specifies whether the
hub is using a Global or Hub-Specific configuration. If this is your first time
configuring the options for a hub, it will display Global for all hubs.
4.
Single-click the hub for which you want to modify the configuration.