Cisco Headend Digital Broadband Delivery System User Guide
4002178 Rev C
Configuring SARA to Enhance Your Subscribers’ Experience
1-45
Build and Send a Configuration to All Set-Tops in a Single Hub,
Continued
Modifying a Hub Configuration
As the demands of your system change, you may need to change some of the
settings for this hub.
Complete the following steps to modify a hub configuration.
Complete the following steps to modify a hub configuration.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Click Hub.
Result: The DHCT Configure Prompt window displays a list of hubs in your
Result: The DHCT Configure Prompt window displays a list of hubs in your
network.
Note: Under the Configuration column, the window specifies whether the
Note: Under the Configuration column, the window specifies whether the
hub is using a Global or Hub-Specific configuration. If this is your first time
configuring the options for a hub, it will display Global for all hubs.
4.
Single-click the hub for which you want to modify the configuration.