Cisco Model 6109 6 MHz Off-Air Reference (NTSC) 설치 가이드

 

4039132 Rev B 

59 

 

FTPUserPassword 

Specifies the password that corresponds to the user 
account on the FTP server. 

InitiateDownload 

Initiates the FTP or SSH download of the software 
upgrade. The three states for this parameter are: 

Inactive - Inhibits the software download. 

Download - Causes the software to be downloaded from 
the download server. The server must be reset in a 
separate operation for the software to be upgraded using 
this mode. 

DownloadInstall - Causes the software to be 
downloaded from the FTP server and then automatically 
installed. 

Note: The Watchdog service (tnoswdog) must be 
running in order for the DownloadInstall to work 
properly. 

DownloadStatus 

Shows the state of the download operation. The states are 
InProgress, ConnectionFailed, LoginFailed, 
FileNotFound, and Idle. The state names are self-
explanatory. After a download is completed, the state 
reverts to Idle. 

DownloadProgress 

Shows the progress of the download in percentage 
complete. 

ImageDownloadString 

Specifies the name of the file to be downloaded from the 
FTP server. 

ImageExecuteString 

Specifies the name of the file to be activated upon the 
next activation of the software. 

ImageActive 

Displays the name of the software file that is active. 

ServerReset 

Provides a control to reset or terminate the software. The 
states for this parameter are: 

Inactive - Inhibits the reset operation. 

Reset - Causes the software to be terminated and then 
restarted. (The watchdog initiates the restart and thus the 
watchdog must be active.) 

Terminate - Causes the software to be terminated.