Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guia Da Instalação
USRM Web Interface - Platform Components
4039132 Rev B
59
Parameter
Description
FTPUserPassword
Specifies the password that corresponds to the user
account on the FTP server.
account on the FTP server.
InitiateDownload
Initiates the FTP or SSH download of the software
upgrade. The three states for this parameter are:
upgrade. The three states for this parameter are:
Inactive - Inhibits the software download.
Download - Causes the software to be downloaded from
the download server. The server must be reset in a
separate operation for the software to be upgraded using
this mode.
the download server. The server must be reset in a
separate operation for the software to be upgraded using
this mode.
DownloadInstall - Causes the software to be
downloaded from the FTP server and then automatically
installed.
downloaded from the FTP server and then automatically
installed.
Note: The Watchdog service (tnoswdog) must be
running in order for the DownloadInstall to work
properly.
running in order for the DownloadInstall to work
properly.
DownloadStatus
Shows the state of the download operation. The states are
InProgress, ConnectionFailed, LoginFailed,
FileNotFound, and Idle. The state names are self-
explanatory. After a download is completed, the state
reverts to Idle.
InProgress, ConnectionFailed, LoginFailed,
FileNotFound, and Idle. The state names are self-
explanatory. After a download is completed, the state
reverts to Idle.
DownloadProgress
Shows the progress of the download in percentage
complete.
complete.
ImageDownloadString
Specifies the name of the file to be downloaded from the
FTP server.
FTP server.
ImageExecuteString
Specifies the name of the file to be activated upon the
next activation of the software.
next activation of the software.
ImageActive
Displays the name of the software file that is active.
ServerReset
Provides a control to reset or terminate the software. The
states for this parameter are:
states for this parameter are:
Inactive - Inhibits the reset operation.
Reset - Causes the software to be terminated and then
restarted. (The watchdog initiates the restart and thus the
watchdog must be active.)
restarted. (The watchdog initiates the restart and thus the
watchdog must be active.)
Terminate - Causes the software to be terminated.