Cisco Model 6109 6 MHz Off-Air Reference (NTSC) 설치 가이드

 

78-4021139-01 Rev D 

429 

 

Usage for this program is as follows: 
"./socketout <UDP port> <enter> 

Socketout 32701

 

The socketout program can also be used in TCP mode. 
Usage for this mode is as follows: 
“./socketout <UDP port> <IP Address> <enter>. 
In this mode, socketout will establish a TCP connection with the server. 

Socketout 61401 10.90.146.63

 

Additionally, a connect period and disconnectDelay can be specified for TCP 

operation. The connect period, in seconds, defines how long a connection is 

maintained. The disconnectDelay, in seconds, defines how long to wait before 

socketout reconnects to the server. 
Usage for these parameters is as follows: 
socketout <UDP Port Number> <USRM IPAddress to connect to> <connect> 

<disconnectDelay> 

socketout 61401 10.90.146.63 10 5

 

The Unix script-based tools for DNCS can be copied to the DNCS and executed from 

there. These script files are located in the /opt/usrm/dncs-tools directory on the 

USRM. The dncs-scripts directory is included with each version of the USRM 

software. 
Note: Each version of the USRM may contain different versions of these scripts 

modified to apply for the specific USRM version. These scripts should be copied to 

the DNCS and run from there. 
The following is a list of the DNCS scripts. 

 

convertzone.sh 

 

doZonesAndQams.sh 

 

extractQams4Server.sh 

 

extractZoneInfo4Server.sh 

 

sdbreport.sh 

Details and usage of these scripts are in the following section.