Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guia Da Instalação
USRM Technical Information
78-4021139-01 Rev D
429
Usage for this program is as follows:
"./socketout <UDP port> <enter>
"./socketout <UDP port> <enter>
Socketout 32701
The socketout program can also be used in TCP mode.
Usage for this mode is as follows:
“./socketout <UDP port> <IP Address> <enter>.
In this mode, socketout will establish a TCP connection with the server.
Usage for this mode is as follows:
“./socketout <UDP port> <IP Address> <enter>.
In this mode, socketout will establish a TCP connection with the server.
Socketout 61401 10.90.146.63
Additionally, a connect period and disconnectDelay can be specified for TCP
operation. The connect period, in seconds, defines how long a connection is
maintained. The disconnectDelay, in seconds, defines how long to wait before
socketout reconnects to the server.
Usage for these parameters is as follows:
socketout <UDP Port Number> <USRM IPAddress to connect to> <connect>
Usage for these parameters is as follows:
socketout <UDP Port Number> <USRM IPAddress to connect to> <connect>
<disconnectDelay>
socketout 61401 10.90.146.63 10 5
DNCS Tools
The Unix script-based tools for DNCS can be copied to the DNCS and executed from
there. These script files are located in the /opt/usrm/dncs-tools directory on the
USRM. The dncs-scripts directory is included with each version of the USRM
software.
Note: Each version of the USRM may contain different versions of these scripts
Note: Each version of the USRM may contain different versions of these scripts
modified to apply for the specific USRM version. These scripts should be copied to
the DNCS and run from there.
The following is a list of the DNCS scripts.
The following is a list of the DNCS scripts.
convertzone.sh
doZonesAndQams.sh
extractQams4Server.sh
extractZoneInfo4Server.sh
sdbreport.sh
Details and usage of these scripts are in the following section.