Cisco Cisco Unified Messaging Gateway Version 8.5 릴리즈 노트

Cisco UMG is compatible with different versions of Cisco Unity Express, Cisco Unity, and 
Avaya Interchange. 

 lists the versions of the different endpoints/nodes with which Cisco UMG is 

compatible.

To determine the software version of Cisco UMG, perform the following steps.

Open a Telnet session.

Telnet to the router by entering telnet ip-address.

Enter the user ID and password of the router.

Enter the following command to enter the Cisco UMG command environment:

service-module integrated-service-engine slot/port session

Enter Cisco UMG EXEC mode by entering the following command:

Enter the following command to display the Cisco UMG software version:

Caveats describe unexpected behavior in Cisco UMG software releases. Severity 1 caveats are the most 
serious caveats. Severity 2 caveats are less serious. Severity 3 caveats are moderate caveats, and only 
selected severity 3 caveats are included in the caveats document.

This section contains open caveats for the current Cisco UMG version. 

The following information is provided for each caveat:

Symptoms—A description of what is observed when the caveat occurs.

Conditions—The conditions under which the caveat has been known to occur.

Workaround—Solutions, if available, to counteract the caveat. 

Cisco Unity Express

2.3 and later versions

Cisco Unity for Microsoft Exchange only

4.2 and later versions 

Cisco Unity Connection

7.0 and later versions

Avaya Interchange

5.4