Cisco Cisco 1 GHz GainMaker Amplifier 설치 가이드
2
Upgrading a GainMaker Line Extender
751173 Rev D
Installing the Upgrade Kit
Preparing for Installation
Follow these steps to prepare the GainMaker Line Extender for 120 V AC powering.
1.
Start with the line extender housing closed. Using a ½-inch torque wrench,
remove the port cap from the forward and reverse input test ports located on
the back of the line extender housing. Set one of the caps aside for later use.
2.
Using a ½-inch torque wrench, loosen the four housing closure bolts and open
the line extender housing.
3.
Pull straight up on each of the AC shunt power directors to remove them.
Important: The AC shunt power directors must be removed.
Important: The AC shunt power directors must be removed.