Cisco Cisco MXE 3500 (Media Experience Engine) 릴리즈 노트
14
Release Notes for Cisco Media Experience Engine 3500, Release 3.3.x
Caveats
Open Caveats
lists the open hardware caveats for Cisco MXE 3500 and includes Severity 2 and Severity 3
caveats.
Because defect status continually changes, this table provides a snapshot of the defects that were open
at the time of the release. For an updated list of open defects, access the Bug Toolkit (
at the time of the release. For an updated list of open defects, access the Bug Toolkit (
, above).
Table 2
Open Caveats for Cisco MXE 3500 Release 3.3.2
Identifier
Headline
CSCud72247
When using Cisco MXE 3500 upgrade bundle via Web UI for an upgrade, the UI
appears stuck during step 2. The upgrade can take a several minutes, and the Web
UI might not reflect the true upgrade status because the UI is being replaced.
appears stuck during step 2. The upgrade can take a several minutes, and the Web
UI might not reflect the true upgrade status because the UI is being replaced.
The workaround is to refresh the UI in the browser to check the status.
CSCtq01074
Configure Hostname/Domain name does not display current configuration.
There is no workaround. The user has to provide the new hostname/DNS without
being able to see the existing values on the same screen.
being able to see the existing values on the same screen.
CSCts53583
SUI: Local Account Passwords containing special characters (%&*) could not log
in.
in.
There is no workaround. Special characters are not allowed for local account
passwords for the Video Conversion Interface.
passwords for the Video Conversion Interface.
CSCts47520
User entered tags in the Video Conversion Interface are truncated to 45 characters
when published to Cisco Show and Share.
when published to Cisco Show and Share.
The workaround is to enter tags within the maximum limit of 45 characters.
CSCts83731
The IP stop trigger option does not work sometimes for live streaming.
The workaround is to set pre-filter option to Optimize for Speed (Preprocessor
profile) and immediate (Encoder profile) for live jobs. If “Optimize for Quality”
is required, the job can be manually stopped from MXE Web UI Job Status page.
profile) and immediate (Encoder profile) for live jobs. If “Optimize for Quality”
is required, the job can be manually stopped from MXE Web UI Job Status page.
CSCts49348
In the Video Conversion Interface, the Show and Share upload button is available
for upload in the Your Results page before transcoding is complete.
for upload in the Your Results page before transcoding is complete.
The workaround is to submit transcoded file to Show and Share from the Job
Status page. In the Job Status page, the video can only be published to Cisco Show
and Share after transcoding is complete. In case an incomplete file is uploaded to
Cisco Show and Share, go to the Show and Share portal and delete the file, then
republish the file from Video Conversion interface after transcoding has been
completed.
Status page. In the Job Status page, the video can only be published to Cisco Show
and Share after transcoding is complete. In case an incomplete file is uploaded to
Cisco Show and Share, go to the Show and Share portal and delete the file, then
republish the file from Video Conversion interface after transcoding has been
completed.
CSCtr57953
In the Video Conversion Interface, upload to Show and Share fails if a
combination of IP address and DNS is used in SUI Admin configuration.
combination of IP address and DNS is used in SUI Admin configuration.
The workaround is to submit transcoded file to Show and Share from the Job
Status page. In the Job Status page, the video can only be published to Cisco Show
and Share after transcoding is complete. In case an incomplete file is uploaded to
Cisco Show and Share, go to the Show and Share portal and delete the file, then
republish the file from Video Conversion interface after transcoding has been
completed.
Status page. In the Job Status page, the video can only be published to Cisco Show
and Share after transcoding is complete. In case an incomplete file is uploaded to
Cisco Show and Share, go to the Show and Share portal and delete the file, then
republish the file from Video Conversion interface after transcoding has been
completed.