Cisco Cisco Prime Collaboration Assurance 11.5 백서

 

 

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

Page 30 of 38 

Initial Configuration 

Cisco Prime Collaboration has a few options for discovering your network: logical discovery, ping discovery, and 

Cisco Discovery Protocol-based discovery. 

This can be done using the Cisco Unified Communications Manager publisher, Cisco TelePresence Management 

Suite, Cisco TelePresence Manager, or VCS IP as the seed device. 

Cisco voice and video infrastructure is discovered using the above devices as the seed device. All of the voice and 

video infrastructure devices including video endpoints are automatically mapped to the appropriate credential 

profile and managed automatically if the credentials are successful. It is strongly recommended to test the 

credential profile against at least one IP address in each of the credential profiles. After all the credentials are 

known to be entered correctly, only then proceed to do the discovery. 

Navigate to Operate > Device Work Center > Discover Devices and enter an easy-to-find job name; most 

importantly, enter the IP address of Cisco TelePresence Server Managers or Cisco TelePresence Management 

Suite. Click Run Now at the bottom of the Discovery Setup window (Figure 26). 

Figure 26.    Discovery Setup