Cisco Cisco Agent Desktop 8.0 설치 가이드
Shutting Down and Restarting Replication
February 21, 2013
123
Shutting Down and Restarting Replication
Systems can be configured with Directory Services and/or Recording and Statistics
Service replication.
Service replication.
If your system has it enabled, you might occasionally need to shut replication down for
short periods. This might be necessary in the following situations:
short periods. This might be necessary in the following situations:
■
You move one of the Directory Services or Recording and Statistics Service
instances to another server.
instances to another server.
■
You need to upgrade CAD.
■
One of the Directory Services servers is shut down for two or more days. When
one of the servers in a replicated system is down for an extended time such
as this, the remaining Directory Services server experiences high resource
usage. The longer that server is down, the higher the resource usage
becomes on the remaining server.
one of the servers in a replicated system is down for an extended time such
as this, the remaining Directory Services server experiences high resource
usage. The longer that server is down, the higher the resource usage
becomes on the remaining server.
This section contains procedures for shutting down and starting up replication. The
procedure you follow depends on what version of CAD you are running.
procedure you follow depends on what version of CAD you are running.
■
■
NOTE: If you are setting up replication for Directory Services and/or
the Recording and Statistics service, make sure that Cisco Security
Agent is stopped on both computers.
the Recording and Statistics service, make sure that Cisco Security
Agent is stopped on both computers.
Shutting Down and Restarting Replication in CAD 8.0,
7.5, and 7.2
7.5, and 7.2
To shut down replication:
1. Log into either the primary or secondary server as a local administrator.
2. Navigate to C:\Program Files\Cisco\Desktop\bin and run PostInstall.exe to
start CAD Configuration Setup.
3. In the Replication Setup window, select Off for both services.
NOTE: In a flat file implementation, the Recording and Statistics
Replication option is not present.
Replication option is not present.
4. Click Apply and exit CAD Configuration Setup. Replication is now shut down.