Samsung bd-h6500 사용자 설명서

 

Ğ

If you have a static IP address or the Automatic 
procedure does not work, you'll need to set 
the Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, 
and then follow these steps:

1.  Select Network Status. The product 

searches for a network, and then displays 
the connection failed message.

2.  On the bottom of the screen, select IP 

Settings, and then press the v button.  

The IP Settings screen appears.

3.  Select the IP Setting field, and then press 

the v button.

4.  Select Enter manually in the IP Setting 

field, and then press the v button.

5.  Select a value to enter (IP Address, for 

example), and then press the v button.  

Use the number keypad on your remote 
control to enter the numbers for the value. 
You can also enter numbers using the 
▲▼ buttons. Use the ◀▶ buttons on the 
remote control to move from entry field 
to entry field within a value. When done 
with one value, press the v button.

6.  Press the ▲ or ▼ button to move to 

another value, and then enter the 
numbers for that value following the 
instructions in Step 5. 

7.  Repeat Steps 5 and 6 until you have filled 

in all values.

| NOTE |

 

You can get the Network values from your Internet 
provider.

8.  When finished entering all the values, 

select OK, and then press the v 

button. The product verifies the network 
connection and then connects to the 
network.

You can set up a wireless network connection 
in four ways: 

 

- Wireless Automatic 

 

- Wireless Manual 

 

- WPS(PBC)

 

- WPS(PIN)
When you configure the wireless network 
connection, any wireless network devices 
currently connected through the product 
or, if applicable, the product's current wired 
connection, will be disconnected.

 

Ğ

1.  In the Home screen, select Settings, and 

then press the v button.

2.  Select Network, and then press the v 

button.

3.  Select Network Settings, and then press 

the v button.

4.  Select Wireless in the Network Settings 

screen, and then press the v button. The 

product searches for and then displays a 
list of the available networks.

5.  Select the desired network, and then press 

the v button.

6.  On the Security screen, enter your 

network's Security Code or Pass Phrase. 
Enter numbers directly using the number 
buttons on your remote control. Enter 
letters by selecting a letter with an arrow 
button, and then pressing v button.

[BD-H6500-XU]AK68-02465G-02ENG-.indd   21

2014-05-27   오후 1:39:01