Samsung bd-h6500 사용자 설명서

Settings

| NOTE |

 

To view the password as you enter it, use the arrow 
buttons to select Show Password on the right side, 

and then press v button.

7.  When finished, select Done and then press 

the v button. The product verifies the 

network connection and then connects to 
the network.

8.  When verification is complete, select OK, 

and then press the v button.

| NOTE |

 

You should be able to find the Security Code or Pass 
Phrase on one of the set up screens you used to set 
up your router or modem.

 

Ğ

If you have a static IP address or the Automatic 
procedure does not work, you'll need to set 
the Network Settings values manually.
1.  Follow the directions in Wireless - 

Automatic through Step 5.

2.  The product searches for a network, 

and then displays the connection failed 
message.

3.  On the bottom of the screen, select IP 

Settings, and then press the v button.  

The IP Settings screen appears.

4.  Select the IP Setting field, and then press 

the v button.

5.  Select Enter manually in the IP Setting 

field, and then press the v button.

6.  Select a value to enter (IP Address, for 

example), and then press v button. 

Use the number keypad on your remote 
control to enter the numbers for the value. 
You can also enter numbers using the 
▲▼ buttons. Use the ◀▶ buttons on the 
remote control to move from entry field 
to entry field within a value. When done 
with one value, press the v button.

7.  Press the ▲ or ▼ button to move to 

another value, and then enter the 
numbers for that value following the 
instructions in Step 6.

8.  Repeat Steps 6 and 7 until you have filled 

in all values.

| NOTE |

 

You can get the Network values from your Internet 
provider.

9.  When finished, select OK, and then 

press the v button. The Security Screen 

appears.

10.  On the Security screen, enter your 

network's Security Code or Pass Phrase. 
Enter numbers directly using the number 
buttons on your remote control. Enter 
letters by selecting a letter with the 
▲▼◀▶ buttons, and then pressing the 
v button.

11.  When finished, select Done at the right of 

the screen, and then press the v button.  

The product verifies the network connection 
and then connects to the network.

12.  After the product verifies the network, 

select OK, and then press the v button.

 

Ğ

1.  In the Home screen, select Settings, and 

then press the v button.

2.  Select Network, and then press the v 

button.

3.  Select Network Settings, and then press 

the v button.

4.  Select Wireless in the Network Settings 

screen, and then press the v button.

5.  Press the ▲ button on your remote, and 

then press the ▶ button to select the 
WPS(PBC).

6.  Press the v button on your remote. The 

"Press the PBC button on your wireless 
router within the next two minutes." 
message appears.

7.  Press the WPS(PBC) button on your 

router within two minutes. Your product 
automatically acquires all the network 
settings values it needs and connects to 
your network. 
The Network Status screen appears. The 

product connects to the network after the 
network connection is verified.

[BD-H6500-XU]AK68-02465G-02ENG-.indd   22

2014-05-27   오후 1:39:02