Samsung SRF677CDBLS 사용자 설명서
setting up
_17
01
SETTING
UP
With the door opened
1. Remove the 3 screws holding down the TOP
TABLE (
1 ) and separate the connected wires.
1
2. Disconnect the two connectors ( 2 ) on the
left side door. To remove the water coupler
from the hinge, twist and pull it from the hinge.
Remove the water line (
from the hinge, twist and pull it from the hinge.
Remove the water line (
3 ) while pressing the
marked part (
4 ) of the water line coupler.
2
3
4
3. Pull and remove the hinge lever ( 5 ). Remove
the ground screw (
6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
(
Remove the upper left and right door hinges
(
7 ).
5
6
7
4. Lift the door straight up to remove.
5. Remove the screw ( 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
(
screwdriver (+). Remove the 2 hex head bolts
(
9 ) attached to the lower left and right door
hinges with an allen wrench (5 mm). Remove
the lower left and right door hinges (
the lower left and right door hinges (
10 ).
Allen wrench
10
8
9
DA68-02916A (EN)-12.indd 17
2016. 3. 24. �� 7:18