Samsung SRF677CDBLS Manuel D’Utilisation

setting up

 

01

 

SETTING

 UP

1.  Remove the 3 screws holding down the TOP 

TABLE ( 

1 ) and separate the connected wires.

1

2.  Disconnect the two connectors ( 2 ) on the 

left side door. To remove the water coupler 
from the hinge, twist and pull it from the hinge. 
Remove the water line ( 

3 ) while pressing the 

marked part ( 

4 ) of the water line coupler. 

2

3

4

3.  Pull and remove the hinge lever ( 5 ). Remove 

the ground screw ( 

6 ) attached to the upper 

left door hinges with a philips screwdriver (+). 
Remove the upper left and right door hinges 
( 

7 ).

5

6

7

4.  Lift the door straight up to remove.

5.  Remove the screw ( 8 ) attached to the 

lower left and right door hinges with a philips 
screwdriver (+). Remove the 2 hex head bolts 
( 

9 ) attached to the lower left and right door 

hinges with an allen wrench (5 mm). Remove 
the lower left and right door hinges ( 

10 ).

Allen wrench

10

8

9

DA68-02916A (EN)-12.indd   17

2016. 3. 24.   �� 7:18