Samsung MM-E330D 사용자 설명서
26
English
Basic Functions
Listening to Radio
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
• Automatic Tuning 1 : Press the STOP button
to select FM XX and then press TUNING (
) buttons to select the preset station.
) buttons to select the preset station.
• Automatic Tuning 2 : Press the STOP button
to select MANUAL and then press and hold
the TUNING (
the TUNING (
) button to automatically
search for active broadcasting stations.
• Manual Tuning : Press the STOP button to
select MANUAL and then briefly press the
TUNING
TUNING
(
) button to increase or decrease
the frequency.
Using buttons on the product
1. Press the F( ) button to select FM .
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP ( )
button to select FM XX and then press the
# $ buttons to select the preset station.
• Automatic Tuning 2 : Press the STOP ( )
button to select MANUAL and then press and
hold the
hold the
# $ buttons to automatically
search the band.
• Manual Tuning : Press the STOP (
) button
to select MANUAL and then press the
# $
buttons to tune in to a lower or higher
frequency.
frequency.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the
sound switches between STEREO and
MONO
MONO
.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
✎
NOTE
This applies only when listening to an FM
station.
station.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the STOP (
) button on the top panel to
select <MANUAL> mode.
3. Press the
# $ button on the top panel to
select <89.10>.
4. Press the ENTER button.
• Number flashes on the display.
5. Press the
# $ buttons on the top panel to
select preset number.
• You can select between 1 and 15 presets.
6. Press the ENTER button again.
• Press the ENTER button before number
disappears from the display.
• Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune in to a preset station, press the # $ on
the top panel to select a channel.
✎
NOTE
You can also use TUNING (
) buttons on the remote
contro
l
instead of
#
or
$
buttons in step 3,5,7
.
About RDS
broadcasting(optional)
Using the RDS (Radio Data System) to
receive FM stations
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
signal along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
service, the RDS indicator lights up on the display.
Description on RDS function
• PTY (Program Type) : Displays the type of programme
currently being broadcast.
• PS NAME (Program Service Name) : Indicates the name of
broadcasting station and is composed of 8 characters.
• RT (Radio Text) : Decodes the text broadcast by a station (if
any) and is composed of maximum 64 characters.
MM-E330DN-ENG-20130507.indd 26
MM-E330DN-ENG-20130507.indd 26
2013-5-17 9:48:01
2013-5-17 9:48:01