Samsung MM-E330D 사용자 설명서

English

Basic Functions

• CT (Clock Time) : Decodes the real time clock from the FM

frequency. Some stations may not transmit PTY, RT or CT
information therefore this may not be displayed in all cases.

• TA (Traffic Announcement) : When this symbol flashes it

shows that the traffic announcement is in progress.

✎

NOTE



RDS may not operate correctly if the station tuned
is not transmitting RDS signal properly or if the
signal strength is weak.

To show the RDS signals

You can see the RDS signals the station sends on the display.

Press the RDS DISPLAY button while listening to an FM

station.

• Each time you press the button, the display

change to show you the following information : PS
NAME

RT CT Frequency

(Program Service)

While searching, <PS> appears
and then the station names will be
displayed. <NO PS> appears if no
signal is sent.

RT(RadioText)

While searching, <RT> appears and
then text messages the station sends
will be displayed. <NO RT> appears if
no signal is sent.

CT (Clock Time)

Decodes the real time clock from the
FM frequency.

Some stations may not transmit PTY,
RT or CT information therefore this
may not be displayed in all cases.

Frequency

Station frequency (non-RDS
service)

About characters shown in the display

When the display shows PS,or RT signals,the following

characters are used.

• The display window cannot differentiate upper case

and lower case letters and always uses upper case

letters.

• The display window cannot show accented letters,

<A,> for instance, may stands for accented <A’s>

like <À, Â, Ä, Á, Å and Ã.>

PTY (Program Type) indication and

PTY-SEARCH function

One of the advantages of the RDS service is that

you can locate a particular kind of program from

the preset channels by specifying the PTY codes.

To search for a program using the PTY

codes

Before you start!

• The PTY Search is only applicable to preset stations.
• To stop searching any time during the process,

press the STOP button while searching.

• There is a time limit in doing the following steps.

If the setting is cancelled before you finish, start from

step 1 again.

• When pressing the buttons on the primary remote

control, make sure that you have selected the FM

station using the primary remote control.

1. Press the RDS PTY button while listening to an

FM station.

2. Press the TUNING

(

)

button until the PTY

code you want appears on the display.

• The display gives you the PTY codes

described to the right.

3. Press the RDS PTY button again, while the PTY code

selected in the previous step is still on the display.

• The centre unit searches 30 preset FM stations,

stops when it finds the one you have selected,

and tunes in that station.

✎

NOTE



This product may not have the RDS function
depending on your region.

MM-E330DN-ENG-20130507.indd 27

2013-5-17 9:48:07