Samsung Standard Definition Camcorder 사용자 설명서

English _

TAKING PHOTO IMAGES 

•  Set the Storage mode switch to CARD before recording on a memory card.

•  You can take photo images using the remote control. page 13 (SC-DX105 only)

1.  Slide the POWER switch downwards to turn the DVD camcorder on.

•  Set the Storage mode switch to CARD. page 30

2.  Check the subject on the LCD screen. (Lens and LCD)

•  Set the Lens open/close switch to open ( ). page 10

3.  Press the PHOTO button to take the picture.

•  A shutter sound is heard. The photo image is recorded with the “Photo capture” 

message appeared.

•  While saving the photo image on the memory cards, you cannot proceed with taking 

the next photo.

•  You can use the zoom function while recording. page 37

•  The number of photo images that can be stored depends on the quality and size of 

the image. page 55

•  The photo image is taken only in the 4:3 aspect ratio on the memory card.

•  Audio will not be recorded with the photo image on the memory card.

•  Please check the protection tab setting on your memory card before recording. 

You may not be able to record when it is locked.

•  If focusing is difficult, use the manual focus function. page 70

•  Do not operate the POWER switch or remove the memory card while accessing 

the storage media. It may damage the storage media or data.

•  Photo images are actually wider than what appears on the LCD screen.

•  The recorded photo image size is 800X600.

����

(AD68-02550A) SC-DX100_ENG_IB.indb   57

2008-03-10   ¿ÀÈÄ 4:18:42