Samsung SCX-4725FN 사용자 설명서

5.1   

<Loading originals and print media>

This chapter introduces you to how to load originals and print media into 
your machine.

This chapter includes:
•

You can use the scanner glass or ADF to load an original for copying, 
scanning, and sending a fax.

Make sure that no originals are in the ADF. If an original is detected in the 
ADF, the machine gives it priority over the original on the scanner glass. 
To get the best scan quality, especially for colored or gray-scaled images, 
use the scanner glass.

Lift and open the scanner lid.

Place the original face down on the scanner glass and align it with 
the registration guide at the top left corner of the glass.

Close the scanner lid.

Using the ADF, you can load up to 30 sheets of paper (75 g/m

2

) for one 

job. 

When you use the ADF:
• Do not load paper smaller than 142 x 148 mm or larger than 

216 x 356 mm.

• Do not attempt to load the following types of paper:

-  carbon-paper or carbon-backed paper
- coated paper
-  onion skin or thin paper
-  wrinkled or creased paper
-  curled or rolled paper
- torn paper

• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is completely 

dry before loading.

• Do not load originals that include different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies, or documents 

having other unusual characteristics.

• Leaving the scanner lid open while copying may affect copy 

quality and toner consumption.

• Dust on the scanner glass may cause black spots on the 

printout. Always keep it clean.