Samsung 120 W 2.1Ch Soundbar F355 사용자 설명서

functions

• Press TV SOURCE on the remote control to change the TV's input 

source.

• Press TV INFO on the remote control to display the TV channel 

information.

• Press TV CH on the remote control to select the TV channel.

• Press TV VOL on the remote control to increase or decrease the volume 

level.

• Use TV PRE-CH button to move to the previous TV channel in TV mode. 

•  To exit the TV menu, use the TV EXIT button. (It functions the same as the 

EXIT button of the TV remote control.)

 

When you press the SoundShare button, the TV's sound is  
transmitted through the Air Track system via a Bluetooth 
connection. The Air Track also controls the sound volume, 
sound quality, etc.

 

The remote control can operate TVs made by SAMSUNG only.

HW-F350 

HW-F355 

SOFTWARE UPGRADE

Samsung may offer upgrades for the Crystal Surround Air Track's system 
firmware in the future.

If an upgrade is offered, you can upgrade the firmware by connecting a USB 
drive with the firmware upgrade stored on it to the USB port on your Air 
Track.

Note that if there are multiple upgrade files, you must load them onto the 
USB drive singly and use them to upgrade the firmware one at a time.

Please visit Samsung.com or contact the Samsung call center to receive 
more information about downloading upgrade files.

 

Insert a USB drive containing the firmware upgrade into the USB port on the main unit.

 

Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn 
off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings. 
We recommend you write down your settings so that you can easily reset them after the upgrade.

 

Once upgrading the product software is completed, turn off the product and then press and hold (

) button for 

a while to reset the product.

 

If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.

 

For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.

 

Depending on the manufacturer, some USB devices may not be supported.