ademco vista-20p 사용자 설명서
– 16 –
Checking For Open Zones
Using the [
∗] Key to Display and Announce System Status
B
efore arming your system, all protected doors, windows and other protection zones
must be closed or bypassed; otherwise the keypad will display a "Not Ready"
message.
Use the READY key to display all faulted zones, making it easier for you to identify
message.
Use the READY key to display all faulted zones, making it easier for you to identify
and secure any open zone.
1. Press [
✱
] (do not enter code first) to display faulted
zones.
2. Secure or bypass the zones displayed.
The keypad’s READY indicator lights when all
protection zones have been either closed or bypassed.
protection zones have been either closed or bypassed.
3. Arm the system as desired.
Alpha Display:
DISARMED - PRESS
∗
TO SHOW FAULTS
Fixed-Word Display:
Zone no. and “NOT READY”
Zone no. and “NOT READY”
Voice Status: Voice keypads (if installed), can announce system status and faulted
zones (up to 3 zone descriptors) if the Voice Status feature is turned on.
To turn the Voice Status feature on/off:
Press the following keys:
[#] + [0] + [2] + [4] (also turns on Voice Chime mode; see Chime mode section)
To announce Status: Press [
✱
] STATUS key once.
To announce faulted zones: Press the [
✱
] STATUS key a second time within 5
seconds of the first press.