Alcatel-Lucent OmniAccess 3500 사용자 가이드

다운로드
페이지 48
 
 
Chapter 5. Initial Configuration 
 
o
 
The DNS name of the gateway and the ADS that generates the keytab file may 
belong to different DNS domains. 
DNS Configuration 
A split DNS configuration must be applied to the DNS server of your network for 
resolution of the gateway’s FQDN. The split DNS configuration must resolve the FQDN 
of the gateway to the IP address of the WAN interface when the name resolution 
request comes from an external host and to the IP address of the LAN interface when 
the resolution request comes from an internal host. 
Router Configuration 
The enterprise router in the subnet of attachment of the LAN interface of the 
OmniAccess 3500 NLG gateway must be provisioned with static routes for the address 
pools that the gateway allocates as VPN addresses for the cards and laptops. The 
routes must have the IP address of the LAN interface of the gateway as the next-hop IP 
address. 
Configuration of Basic Parameters 
You must configure the network and other basic parameters using the pre-configured 
IP address of the gateway (192.168.1.1). This section explains how to perform this 
procedure.  
1.  Connect a computer to the LAN (private) port of the gateway using an Ethernet 
cable. Ensure that the LED on the LAN interface is lit. 
2.  Open a web browser on your computer. 
3.  Type the following IP address in the address bar of the browser: 
https://192.168.1.1 
4.  You will be asked to enter the login ID and password for the super administrator 
(the default login ID is “admin” and the default password is “evros”). 
5.  The initial Gateway Configuration File Upload window appears (Figure 23). 
 
Figure 23:  Gateway Configuration File Upload window 
 
 
31