Alcatel-Lucent OmniAccess 3500 사용자 가이드

 

 

on the [Connection Manager Tunnel Table (Add)] window, reachable through 
the [Gateway|Configure Advanced Settings|Tunnel Table|New] path.  

o

 

Gateway Certificate ID: Identifier of the certificate that the OmniAccess 3500 
NLG gateway uses for mutual authentication with the OmniAccess 3500 NLG 

cards. This entry must be set when the gateway is first configured. Later on, 
any modification of the Gateway Certificate ID must be applied on the 
[Connection Manager Tunnel Table (Add)] window, reachable through the 
[Gateway|Configure Advanced Settings|Tunnel Table|New] path. 

 

10. Type the appropriate information into the fields that do not contain default 

values. 

11. Click Save when you are finished entering information. 
12. A window appears stating that the operation has been successful. 
13. Connect the WAN and LAN interfaces of the gateway to the gateway’s preferred 

network outlets. 

14. The gateway will reboot and then resume operation with the overall configuration 

that was most recently saved. 

After rebooting the gateway, any subsequent administrative action can be completed 
through the management system GUI from a Web Browser. Please note that in 
OmniAccess 3500 NLG R1.2 the management system functionality is integrated in the 

gateway and automatically configured with the configuration of the gateway.  

 

 

37