Aopen ak73av 사용자 설명서
AK73(A)-V / AK73-V
Online Manual
AK73(A)-V / AK73-V
Online Manual
If the "CPU Cooling Fan Malfunction Protection" function is enabled, BIOS will monitor CPU cooling fan speed immediately.
If the cooling fan speed is lower than (500) RPM or failed, the system will shutdown automatically to protect CPU. You also can
set the "CPU shutdown temperature" from 55
o
C to 70
o
C by 5
o
C stepping. When this function is enabled and BIOS detects CPU
temperature is over setting value, the system will shutdown automatically, too.
There are situations where the system is shutdown automatically by these two CPU protection functions and you need to bring
back the system to operating mode, just simply press the <F10> key continuously while the system is doing POST (Power-On
Self Test) to disable these two functions.
Note: You must using 3-pin CPU cooler
fan with this motherboard. Only 3-pin
cooler fan has support hardware
monitoring function.
Warning: Powering up the system
without CPU heatsink and cooling fan will
permanently damage the CPU in just a
few seconds.
26