ASUS p2en 사용자 설명서

This connector supports the provided IDE hard disk drive ribbon cable. After
connecting one end to the riser card, connect the other end to a hard disk drive.
The primary IDE channel supports both a master and a slave IDE device but the
system housing size only permits a standard IDE hard drive to be installed.

Primary IDE Connector

Orient the red stripe on the
IDE ribbon cable to Pin 1

Pin 1

This connector supports the provided floppy drive ribbon cable.  After connect-
ing the single end to the riser card, connect the other end to a 3.5inch floppy disk
drive.

Panel Conn.

Riser Slot

Floppy Drive Conn.

Orient the red stripe on the
floppy ribbon cable to Pin 1

Pin 1

These connectors support Local Area Network (LAN) cards such as the ASUS
PCI-L101 with output signals for data transfer activity. The LAN_LED connec-
tor allows the front panel LED to blink during transfer activity between the
network and the computer. The WOL_CON connector allows the system to power
up when there is a wakeup package (signal) received from the network.

Riser Slot

LAN activity LED

Wake on LAN activity

III. INSTALLATION

Connectors