ASUS p2en 사용자 설명서

III. INSTALLATION

Connectors

Lights when the system is powered on and blinks when it is in sleep mode.

Switches between ON, OFF, and SLEEP mode. The functions are controlled
and configurable through the “Power Up Control” in the POWER MANAGE-
MENT SETUP of the BIOS SOFTWARE.

Accepts a standard 3.5inch floppy drive, LS-120, or other compatible devices.

Blinks when data is transfered to or from a network card. (The network card
requires an external LED wire connected to the Riser card’s LAN_LED.)

Blinks when data is transfered via the IDE channels, includes the CD-ROM.

The LED will remain lit when there is no modem activity and blink when there
is data being transfered or waiting in the inbox. Requires ACPI OS support.

Switch used for rebooting the computer without having to use the power switch

Decreases the onboard audio amplifier’s volume.

Increases the onboard audio amplifier’s volume.

Accepts only a notebook-size CD-ROM.

Accepts a 1/8inch connector from a microphone or other audio source.

Accepts 15 USB devices on each port.

Allows transmission and reception of infrared signals by the onboard module.

A

B C

E F

H

I

D

J

G

K

L

M

Front Panel Descriptions