ASUS rx3041h 사용자 설명서
RX3041H User’s Manual
Chapter 5. Configuring LAN Settings
27
5.2.2
DHCP Server Configuration
5.2.2.1
DHCP Configuration Parameters
Table 5.2 describes the configuration parameters available for DHCP service.
Table 5.2. DHCP Server Configuration Parameters
Field
Description
IP Address Pool
Begin/End
Begin/End
Specify the lowest and highest addresses in the DHCP address pool.
Subnet Mask
Enter the subnet mask to be used for the DHCP address pool.
Lease Time
The amount of time the assigned address will be used by a device connected
on the LAN.
on the LAN.
Default Gateway IP
Address
Address
The address of the default gateway for computers that receive IP addresses
from this pool. The default gateway is the device that the DHCP client
computers first contacted to communicate with the Internet. Typically, it is the
RX3041H’s LAN port IP address.
from this pool. The default gateway is the device that the DHCP client
computers first contacted to communicate with the Internet. Typically, it is the
RX3041H’s LAN port IP address.
Primary/Secondary
DNS Server IP
Address
DNS Server IP
Address
The IP address of the Domain Name System server to be used by computers
that receive IP addresses from this pool. The DNS server translates common
Internet names that you type into your web browser into their equivalent
numeric IP addresses. Typically, the server(s) are located with your ISP.
However, you may enter LAN IP address of the RX3041H as it will serve as
DNS proxy for the LAN computers and forward the DNS request from the
LAN to DNS servers and relay the results back to the LAN computers. Note
that both the primary and secondary DNS servers are optional.
that receive IP addresses from this pool. The DNS server translates common
Internet names that you type into your web browser into their equivalent
numeric IP addresses. Typically, the server(s) are located with your ISP.
However, you may enter LAN IP address of the RX3041H as it will serve as
DNS proxy for the LAN computers and forward the DNS request from the
LAN to DNS servers and relay the results back to the LAN computers. Note
that both the primary and secondary DNS servers are optional.
Primary/Secondary
WINS Server IP
Address (optional)
WINS Server IP
Address (optional)
The IP address of the WINS servers to be used by computers that receive IP
addresses from the DHCP IP address pool. You don’t need to enter this
information unless your network has WINS servers.
addresses from the DHCP IP address pool. You don’t need to enter this
information unless your network has WINS servers.
5.2.2.2 Configuring
DHCP
Server
Note
By default, the RX3041H is configured as a DHCP server on the
LAN side, with a predefined IP address pool of 192.168.1.10
through 192.168.1.200 (subnet mask 255.255.255.0). To change
this range of addresses, follow the procedures described in this
section.
LAN side, with a predefined IP address pool of 192.168.1.10
through 192.168.1.200 (subnet mask 255.255.255.0). To change
this range of addresses, follow the procedures described in this
section.
First, you must configure your PCs to accept DHCP information assigned by a
DHCP server:
DHCP server:
1. Open the DHCP server configuration page by clicking the LAN
Î DH
menu. You will see the existing DHCP server configuration and the IP
lease table when you open the page.
lease table when you open the page.
CP
2. Enter the information for the IP Address Pool (Begin/End Address),
Subnet Mask, Lease Time and Default Gateway IP Address fields; others, such as
Primary/Secondary DNS Server IP Address and Primary/Secondary WINS Server IP
Address are optional. However, it is recommended that you enter the primary DNS server IP
address in the space provided. You may enter the LAN IP or your ISP’s DNS IP address in the
primary DNS Server IP Address field. For details of each configuration parameter, please refer to
Table 5.2.
Primary/Secondary DNS Server IP Address and Primary/Secondary WINS Server IP
Address are optional. However, it is recommended that you enter the primary DNS server IP
address in the space provided. You may enter the LAN IP or your ISP’s DNS IP address in the
primary DNS Server IP Address field. For details of each configuration parameter, please refer to
Table 5.2.