Audioline dect4500 사용자 설명서

78

Up to four additional handsets can be logged on to your base station. You can 
obtain these additional handsets from your AUDIOLINE dealer with the designation 
DECT 4501. 

When you use multiple handsets you will have the following options: 
- 

Internal calls between handsets.  

- 

External calls can be forwarded between handsets. 

- 

Incoming external calls are signalled on all handsets. 

- 

Room monitoring  

Note: If another handset is already using the external line, the message EXT will 
appear on all handsets. In this case, it is not possible to make a further external call. 

When you have connected multiple handsets to a base station, you will be able to 

make internal calls. To do this, press the 

 button and then the number of the 

required handset. The call is accepted with the call button 

 on the handset called. 

If an external call comes in while you are making an internal call, you will hear short 
signal tones and the message EXT will flash in the display. To take the external call, 

end the internal call by means of the call button 

 and accept the external call with 

the call button 

 .

If you have accepted an external call on one handset, you can forward the external 

call to another handset. To do this, press the 

 button and then the number of 

the required handset. After the internal call has been accepted at the other handset, 
you have the following options: 
A. Consultation / Brokering: You can now speak to the internal subscriber and 

return to the external caller by pressing the 

 button. You can switch between 

the external and the internal call as many times as you like in this way. 
B. Forward the call: The external call is forwarded to the handset called by 

pressing the call button 

 on the first handset. 

Note: Handsets from other manufacturers can also be integrated into the telephone 
system by means of the internationally adopted GAP standard. In the same way, 
you can use an AUDIOLINE handset on base stations from other manufacturers, as 
long as these units work using the GAP standard.