HP designjet l65500 서비스 매뉴얼

252

Troubleshooting

•

63 = 30*2+3 = March 3

rd 

•

361 = 12*30 + 1 = Dec. 31 

Memory: The size of the memory on the main board, always 256MB on the HP Designjet L65500. 

Language: Configuration of the small front panel. 

Current temperature: Not available: Will become available from the next firmware and IPS release. 

It will then display the temperature on the ISM board, which can then be higher compared to the actual 

ambient temperature when the printer just have been printing.

Printer status: This is also displayed on the first line of the front panel. 

Here is an extract from the current info 

here is an extract from the history section.

Warranty status: it is important to refer to the Legal information guide available on the 

www.hp.com 

web site, under documentation of the L65500. Here are 2 copies from this guide: 

Warranty of Printhead: “Until the “end of warranty” date printed on the product is reached, or 12000 ml 

of HP ink have been cycled through the printhead, whichever occurs first”. Warranty of the cartridge: 

“Until the HP ink is depleted, or the “end of warranty” date printed on the cartridge has been reached, 

whichever occurs first. This warranty does not cover HP ink products that have been refilled, 

remanufactured, refurbished, misused or tampered with.” Usually the end of warranty date is one year 

after the manufacturing date. The ‘warranty date’ is the end of warranty, which is normally 18 months 

form the manufacturing date of the Printhead. 

When ‘Out of warranty’, the printer detects that it is out of the PH warranty following at least one item 

mentioned under. 

When ‘See warranty note’, it refers to this part of the legal document: “However, if printer failure or 

damage is attributable to the use of a non-HP or refilled ink cartridge or an expired ink cartridge, HP's 

authorized representative will charge its standard time and materials charges to service the printer for the