HP designjet l65500 서비스 매뉴얼

254

Troubleshooting

Other examples from the previous screen shot: 

•

K/C PH: 532512 (DECIMAL) -> convert to (in binary) 10000010000000100000 => following error 

detected: TEMP_EXTREMELY_LOW, CSDATA_NOT_RESPONDING and EXPIRED (used expired ink). 

The connection between the Printer and the Printhead does not seem to work -> need to check all the 

different connections, and run the 6.0 from diagnostic menu (trailing cable check). Swapping the PH 

interconnect board can also check if the failure is following or not this board. 

•

For the M/Y PH, current value is 262144 -> convert to (in binary) 1000000000000000000 => 

END_OF_LIFE, which seems to mean that the PH is out of WTY (more than 12 l of ink consumed 

from the current status, and also available within the history > 100% warranty used). 

•

for the Lc/Lm, current value is 524288 -> convert to (in binary) 10000000000000000000 => 

EXPIRED, which is in line within the current status with a 'yes' within the 'used with expired ink' -> at 

least one time, this Printhead has been used with ‘expired ink’. 

Here is a more detailed table: 

The install date is the printer’s date when the cartridge is installed for the first time in the printer. 

The Expiration date is usually one year more versus the manufacturing date of the cartridge.