HP digital sender 9200c 서비스 매뉴얼
Configuring and verifying an IP address
You can use either of two options to assign and configure TCP/IP addresses on an HP Jetdirect print
server:
server:
■
HP Web Jetadmin
■
Embedded Web server
TCP/IP assignment
The system administrator or primary user is responsible for determining the TCP/IP address for a
specific print server. If you are unsure what the TCP/IP address should be or if you are unfamiliar
with using TCP/IP on a network, go to the HP Web site at
specific print server. If you are unsure what the TCP/IP address should be or if you are unfamiliar
with using TCP/IP on a network, go to the HP Web site at
. Click Search in the upper-
left corner of the Web page and search for TCP/IP Overview.
Automatic discovery
The product is equipped with an HP Jetdirect Inside embedded print server. If a BootP or DHCP
server is available during product installation, the print server is automatically assigned an IP
address for use on the network. This occurs because the print server defaults to 192.0.0.192 (Legacy
default) or to 159.254.x.x (Auto IP) if the print server cannot obtain an IP address over the network
from a BootP or DHCP server. The default that is assigned depends on the particular network (small/
private or enterprise) by using sensing algorithms.
server is available during product installation, the print server is automatically assigned an IP
address for use on the network. This occurs because the print server defaults to 192.0.0.192 (Legacy
default) or to 159.254.x.x (Auto IP) if the print server cannot obtain an IP address over the network
from a BootP or DHCP server. The default that is assigned depends on the particular network (small/
private or enterprise) by using sensing algorithms.
To determine the new IP address, view the configuration page and check the TCP/IP status and
address.
address.
Dynamic Host Configuration Protocol (DHCP)
When the product is turned on, the HP Jetdirect Inside print server broadcasts DHCP requests.
DHCP automatically downloads an IP address from a network server. DHCP servers maintain a fixed
set of IP addresses and only loan an IP address to the print server. Consult your operating system
documentation to set up DHCP service on your network.
DHCP automatically downloads an IP address from a network server. DHCP servers maintain a fixed
set of IP addresses and only loan an IP address to the print server. Consult your operating system
documentation to set up DHCP service on your network.
Verifying the TCP/IP configuration
Two ways are available to view the TCP/IP address of the digital sender:
■
Go to the digital sender and look at the upper-left corner of the touchscreen. The IP address
should appear next to the word Ready.
should appear next to the word Ready.
■
If the IP address does not appear on the touchscreen, press the
M
ENU
button on the control
panel. Touch the INFORMATION menu, and then touch SHOW CONFIGURATION. The digital-
sender configuration information appears on the touchscreen. Touch the NEXT button to see the
Jetdirect data. Scroll through the information until you find the IP address.
sender configuration information appears on the touchscreen. Touch the NEXT button to see the
Jetdirect data. Scroll through the information until you find the IP address.
Changing an IP address
Use the following procedures if you need to change the product TCP/IP address.
Configuring and verifying an IP address
47