HP m2727 mfp 사용자 설명서
NOTE:
The pulse-dialing option is not available in all countries/regions.
Set billing codes
If the billing codes feature has been turned on, the user will be asked to enter a billing code for each
fax. The billing code count is increased for each fax page that is sent. This includes all types of faxes
except for poll-received, fax-forwarded, or computer-downloaded faxes. For an undefined group or a
group-dial fax, the billing code count is increased for each successful fax that is sent to each destination.
To print a report that shows the total for each billing code, see
fax. The billing code count is increased for each fax page that is sent. This includes all types of faxes
except for poll-received, fax-forwarded, or computer-downloaded faxes. For an undefined group or a
group-dial fax, the billing code count is increased for each successful fax that is sent to each destination.
To print a report that shows the total for each billing code, see
The factory-set default for the billing-code setting is Off. The billing code can be any number from 1
through 250.
through 250.
Set the billing-code setting
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the arrow buttons to select Fax Send setup, and then press
OK
.
4.
Use the arrow buttons to select Billing codes, and then press
OK
.
5.
Use the arrow buttons to select On or Off, and then press
OK
.
Use billing codes
1.
Load the document in the automatic document feeder (ADF) input tray or on the flatbed scanner.
2.
On the control panel, enter the phone number manually, by speed-dial, or by group-dial entry.
3.
Press
Start Fax
.
4.
Enter the billing code, and then press
Start Fax
.
The fax job is sent and recorded in the billing-code report. For information about printing the billing-code
report, see
report, see
.
Print the billing-code report
The billing-code report is a printed list of all of the fax billing codes and the total number of faxes that
have been billed to each code.
have been billed to each code.
NOTE:
After this report is printed, all billing data is deleted.
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Reports, and then press
OK
.
3.
Use the arrow buttons to select Billing report, and then press
OK
. The product exits the menu
settings and prints the report.
ENWW
Change fax settings 109