Canon fax-jx200 사용자 설명서

Sending Faxes

Press [Caller History], then wait for 2 seconds or press any button.

The numbers, names, and date and time from which you have received calls recently will be 
displayed on the LCD.

z

Press [Redial] or [Coded Dial/Directory] to switch between the date and time, name, and 
phone/fax number on the LCD.

Use [{] or [}] to select the receiving party, then press [Start/Copy].

The fax begins calling the number.

„

Many information services for banks, airline reservations, hotel reservations, etc. require tone
dialing for their services. If your machine is connected to a rotary pulse line, you can set the
machine to temporarily switch to tone dialing.

Press [Hook] or lift the handset.

Use the Numeric buttons to dial the number of the information service.

When the recorded message of the information service answers, press [Tone] ([ ]) 
to switch to tone dialing.

If you pressed [Hook] in step 1 and wish to talk to the other party, lift the handset.

Use the Numeric buttons to enter the numbers requested by the information 
service.

When you have finished using the service, press [Hook] or hang up the handset.

„

When you register a long-distance number, you may have to insert a pause within or after the 
number. For long-distance dialing, the location and length of the pause may differ depending on 
the telephone system. To enter a pause, press [Pause]. The length of this pause can be 
adjusted. See <PAUSE TIME> on page 39. A pause at the end of a number is fixed at 10 
seconds.

There are two methods of redialing: manual redialing and automatic redialing. This section explains 
these two methods.

„

Press [Redial] to dial the last number you dialed with the numeric buttons*. (This starts redialing 
regardless of whether automatic redialing is enabled.)
*This setting is only available when you dialed with the numeric buttons.

01:

3456XXXX

]

CANON

20/12 2006 13:30

]