Canon fax-jx200 사용자 설명서
21
Sending Faxes
3
Use [{] or [}] to select <SCAN CONTRAST>, then press [Start/Copy]. The LCD
displays <STANDARD>.
displays <STANDARD>.
4
Use [{] or [}] to adjust the scanning contrast, then press [Start/Copy].
You can select <STANDARD>, <DARKER> or <LIGHTER>.
5
Press [Stop].
Setting ends and the fax returns to standby mode.
Automatic Dialing
Sending a Document Using One-Touch Speed Dialing or Coded Speed
Dialing Numbers
Dialing Numbers
To use this feature you must first register numbers for one-touch speed dialing (see page 13) or
coded speed dialing (see page 14).
coded speed dialing (see page 14).
1
Load the document face up into the Document Tray.
See “Loading Documents and Paper” on page 16.
You can set the scanning resolution and the contrast (see page 20).
You can set the scanning resolution and the contrast (see page 20).
2
Press the one-touch speed dialing button under which the number you wish to fax
is registered.
is registered.
-or-
Press [Coded] and enter the appropriate two-digit coded speed dialing code.
Press [Coded] and enter the appropriate two-digit coded speed dialing code.
The registered name and number appear.
If you make a mistake, press [Stop]. Then press the correct one-touch speed dialing button or
press [Coded] and re-enter the code.
If you make a mistake, press [Stop]. Then press the correct one-touch speed dialing button or
press [Coded] and re-enter the code.
3
Press [Start/Copy].
The fax begins sending.
-or-
After about 10 seconds of no operation panel input, the fax starts sending automatically.
-or-
After about 10 seconds of no operation panel input, the fax starts sending automatically.
01=CANON
01=CANON