Canon fax-jx200 사용자 설명서

Introduction

z

When the ink in the FINE Cartridge starts to run out, the machine will switch to memory reception 
of faxes.

z

You can register One-touch and Coded Dial numbers in your fax machine to make sending faxes 
easier and faster.

z

There are several different ways to receive faxes using this machine. Select the one that most 
suits your needs.

z

When the ink level is low faxes will be received into the memory. Once 30 transmissions have 
been received reception will no longer be possible, so be sure to print out and delete 
unnecessary faxes from the memory.

z

In the unlikely event that your machine jams you will need to remove the jammed paper.

z

To send a fax or make a telephone call, you need to set the telephone line type setting properly 
on the machine. If you are unsure of your telephone line type, contact your telephone company.

z

Received faxes will not be printed automatically.  To print received faxes, press [ON/OFF] again 
to disable <AUTO PRINT OFF>. 

See “Printing a Document in Memory” on page 34  
See “Replacing a FINE Cartridge” on page 45
See “Aligning the FINE Cartridge” on page 48

See “Registering One-touch Speed Dialing Numbers and Names” on page 13
See “Registering Coded Speed Dialing Numbers and Names” on page 14

See “Setting the Receive Mode” on page 29 

See “Printing All Unprinted Documents in Memory” on page 35
See "Deleting All Printed Documents from Memory" on page 36

See “Paper Jams” on page 53

See “Setting the TEL LINE TYPE” on page 10

See “Receiving to Memory Temporarily” on page 32