Canon imageclass 2300n 네트워크 가이드
TCP/IP Network Setup Procedures
2-2
Using a
TCP/IP Netw
o
rk
(Windo
ws/UNIX)
2
TCP/IP Network Setup Procedures
To use a TCP/IP network, it is necessary to perform the following procedures.
IMPORTANT
•
It is recommended that the network manager perform steps 1, 2, and 3 above.
•
If you are printing using a TCP/IP network, you can use the following print applications:
- LPD
- FTP
- Raw (Windows 2000/XP only)
- IPP (Windows 95/98/Me/2000/XP only)
- LPD
- FTP
- Raw (Windows 2000/XP only)
- IPP (Windows 95/98/Me/2000/XP only)
•
This machine does not come with printer driver software that can be used for each UNIX
platform.
platform.
•
If configuring the basic protocol settings for the first time, use the control panel of this
machine.
machine.
1
Network Cable Connection (See Chapter 1, "Before You Start Using This
Machine," in the PCL Printer Guide.)
Machine," in the PCL Printer Guide.)
Connect the network cables in accordance with the PCL Printer Guide.
2
Preparation for Protocol Settings (See "Preparation for Protocol Settings," on
p. 2-3.)
p. 2-3.)
Specify the machine's basic protocol settings for communication between the machine and computers using
the machine. To specify the settings use:
the machine. To specify the settings use:
•
The machine's Control Panel (Additional Functions menu)
•
NetSpot Device Installer (Canon utility software)
•
ARP/PING commands
3
Specify the machine's advanced protocol settings. To specify the settings use:
•
NetSpot Device Installer (Canon utility software)
•
NetSpot Console (via a web browser) (Canon utility software)
•
A web browser (Remote UI)
•
An FTP client
4
Computer Settings for Printing (See "Setting Up a Computer for Printing," on
p. 2-21.)
p. 2-21.)
Specify the settings for each computer you use for printing.