Canon imageclass mf6560 사용자 설명서
1
2
3
4
5
6
7
8
Back
3-24
8.
Click [Finish].
If the dialog box displays [Additional Port Information Required],
follow the instructions on the screen to search again, or click
[Standard]
follow the instructions on the screen to search again, or click
[Standard]
→
click [Canon Network Printing Device with P9100]
from the pull-down list
→
click [Next].
9.
Click [Close] to close the [Printer Ports]
dialog box.
dialog box.
If you want to use Raw, skip to step 11.
10.
In the printer properties dialog box, click
[Configure Port]
[Configure Port]
→ Click [LPR] under
[Protocol]
→ enter a print queue in [Queue
Name] under [LPR Settings].
NOTE
You can specify a print queue in [Queue Name]. The following
three print queues are available:
LP: The machine prints according to its spool settings. Normally
select this option.
SPOOL: The machine prints only after spooling a print job on the
hard disk, regardless of its spool settings.
DIRECT: The machine prints without spooling a print job on the
hard disk, regardless of its spool settings.
three print queues are available:
LP: The machine prints according to its spool settings. Normally
select this option.
SPOOL: The machine prints only after spooling a print job on the
hard disk, regardless of its spool settings.
DIRECT: The machine prints without spooling a print job on the
hard disk, regardless of its spool settings.
11.
Click [OK].
12.
Click [Close].