Canon multipass mp700 빠른 참조 카드
Chapter 10
Troubleshooting
10-5
10
Troubleshooting
The ink empty message is displayed differently on the printer status monitor than
how it is displayed on the machine’s LCD.
While you are printing from your computer, if the ink empty message is displayed on the printer
status monitor and on the machine’s LCD, press [Resume] on the machine and cancel the job. On
the printer status monitor, the message changes to [Ink low] and you can continue printing for a
short period of time.
However, the ink empty message on the machine’s LCD does not change so replace the appropriate
ink tank.
status monitor and on the machine’s LCD, press [Resume] on the machine and cancel the job. On
the printer status monitor, the message changes to [Ink low] and you can continue printing for a
short period of time.
However, the ink empty message on the machine’s LCD does not change so replace the appropriate
ink tank.
Copying problems
See below if you are having problems copying.
For printing-related problems, see the items marked with
For printing-related problems, see the items marked with
in Problems printing from your
computer, p. 10-2.
Cannot make a copy (the document or paper will not feed into the machine).
1. Is there anything displayed in the LCD?
2. Is the Alarm light blinking?
3. Is the document loaded correctly?
Check that the document is loaded correctly on the platen glass or
ADF (
4. See Paper does not feed properly on p. 10-3.5. Are the ink tanks installed correctly?
Press [Open] and lift up the scanning unit (Printer cover). Press “PUSH” on the tanks and check that
they are securely inserted.
they are securely inserted.
6. Print the nozzle check pattern (
Maintaining the printhead, p. 9-3).
Paper comes out but there is nothing copied on it.
1. Is the document loaded correctly?
If placing the document on the platen glass, the side to be copied should be face down.
If
placing the document in the ADF, the side to be copied should be face up (
2. Has ink run out?
If nothing prints or one of the colors does not print, check if the ink tanks are empty. Replace the ink
tank(s) if necessary. Also, make sure the orange tape has been completely removed from the ink tanks.
tank(s) if necessary. Also, make sure the orange tape has been completely removed from the ink tanks.
3. Print the nozzle check pattern (
Maintaining the printhead, p. 9-3).
P
Fax Model
Fax Model
PUSU
Ye
llow
Ma
de
in
Ja
pa
n
Ink
Ta
nk
BC
I-3
eY
Remove the tape up to the perforations.
Correct
Tape not removed completely