Canon PowerShot SD30
61
Shooting
Setting the Camera to the Color
Accent Mode
Colors other than the color specified in the LCD monitor are
shot in black and white.
shot in black and white.
1
(Color Accent)
.
The camera will switch to
color input mode and the
display will alternate
between the original image
and the color accent image
(using the previously set
color).
display will alternate
between the original image
and the color accent image
(using the previously set
color).
2
Aim the camera so that the color you wish
to retain appears at the center of the LCD
monitor and press the button.
Only one color can be specified.
You can use the
You can use the
or
button to specify the range
of colors that are retained.
• -5: Only takes the color that you want to retain
• +5: Also takes colors close to the one that you want
• -5: Only takes the color that you want to retain
• +5: Also takes colors close to the one that you want
to retain
3
.
This completes the setting.
If you press the MENU button at this point, you will return
If you press the MENU button at this point, you will return
to the screen where you can select a My Colors mode.
The default color accent is green.
You may not obtain the expected results after color
input mode if you use the flash, or change the white
balance or metering settings.
The specified color accent is retained even if the
camera's power is turned off.
You may not obtain the expected results after color
input mode if you use the flash, or change the white
balance or metering settings.
The specified color accent is retained even if the
camera's power is turned off.
170CUGBook(Basic-Advanced).book Page 61 Tuesday, June 21, 2005 10:02 PM