Canon PowerShot SD30

.

This completes the setting.
If you press the MENU button at this point, you will return 

to the screen where you can select a My Colors mode.

The default setting for color swap mode changes 
green into white.
You may not obtain the expected results after color 
input mode if you use the flash, or change the white 
balance or metering settings.
The colors specified in the color swap mode are 
retained even if the camera's power is turned off.

Setting the Camera to a Custom Color Mode

This mode allows you to adjust the color balance for red, 
green, blue and skin tones.

 (Custom Color)

.

Use the   or   but-

ton to select [Red], 

[Green], [Blue] or 

[Skin Tone] and the   

or   button to adjust 

the color balance.

The altered color will display.

.

This completes the setting.
If you press the MENU button at this point, you will return 

to the screen where you can select a My Colors mode.

Select 
a color.

Adjust the 
color balance.

170CUGBook(Basic-Advanced).book  Page 63  Tuesday, June 21, 2005  10:02 PM