Sony 3-097-194-15(1) 사용자 설명서

CMT-DH3.GB.3-097-194-11(1)

Additional I

nf

or

ma
tion

 Discs of non-standard shape (for example, 

heart, square, star)

 Discs that have adhesive tape, paper, or 

sticker attached to them

 Rental or used discs with attached seals 

where the glue extends beyond the seal

 Discs that have labels printed using ink that 

feels tacky when touched

 Before playing, wipe the disc with a cleaning 

cloth from the center out to the edge.

 Do not clean discs with solvents, such as 

benzine thinner, or commercially available 

cleaners or anti-static spray intended for 

vinyl LPs.

 Do not expose discs to direct sunlight or heat 

sources such as hot air ducts, nor leave it in a 

car parked in direct sunlight.

 Do not use discs encircled with a protection 

ring. This may cause a malfunction to the 

system.

Before operating the system, check that the 

operating voltage of the unit is identical with 

the voltage of your local power supply.

 The unit is not disconnected from the 

AC power source (mains) as long as it is 

connected to the wall socket, even if the unit 

itself has been turned off.

 Completely disconnect the power cord 

(mains lead) from the wall socket (mains) 

if it is not going to be used for an extended 

period of time. When unplugging the unit, 

always grip the plug. Never pull the cord 

itself.

 Should any solid object or liquid get into 

the system, unplug the system, and have 

it checked by qualified personnel before 

operating it again.

 The AC power cord can be changed only by a 

qualified service facility.

 Do not place the system in an inclined 

position or in locations that are extremely 

hot, cold, dusty, dirty, or humid or lacking 

adequate ventilation, or subject to vibration, 

direct sunlight or a bright light.

 Be careful when placing the unit or speakers 

on surfaces that have been specially treated 

(for example, with wax, oil, polish) as 

staining or discoloration of the surface may 

result.

 If the system is brought directly from a cold 

to a warm location or is placed in a very 

damp room, moisture may condense on the 

lens inside the DVD player, and cause the 

system to malfunction. In this situation, 

remove the disc, and leave the system turned 

on for about an hour until the moisture 

evaporates.

