Sony 3-097-194-15(1) 사용자 설명서

CMT-DH3.GB.3-097-194-11(1)

 Heat buildup on the unit during operation is 

normal and is not cause for alarm.

 Do not touch the cabinet if it has been used 

continuously at a high volume because the 

cabinet may have become hot.

 Do not obstruct the ventilation holes.

The front speaker is magnetically shielded and 

can be installed near a TV. Color irregularity 

may still be observed, however on some types 

of TV screens. In this situation, turn off the 

TV, wait 15 to 30 minutes, and turn it back 

on. Place the right speaker on the right side of 

the unit and the left speaker on the left side of 

the unit. If there is no improvement, move the 

speakers far away from the TV.

Caution: If you leave a still video image 

or on-screen display image displayed on 

your TV for an extended period of time via 

this system, you risk permanent damage 

to your TV screen. Projection TVs are 

especially susceptible to this.

Clean this system with a soft cloth slightly 

moistened with a mild detergent solution. 

Do not use any type of abrasive pad, scouring 

powder, or solvent, such as thinner, benzine, 

or alcohol. 

DIN power output (rated)

40 W + 40 W (6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

50 W + 50 W (6 ohms at 1 kHz, 10% 

THD)

Inputs:

AUDIO IN (stereo mini jack):

Voltage 620 mV, impedance 

47 kilohms

MIC (mini jack):

Sensitivity 0.8 mV, impedance 

10 kilohms

 (USB) port:

Type A, maximum current 500 mA

Outputs:

DIGITAL OUT (square optical connector 

jack):

Wavelength 660 nm

VIDEO OUT (phono jack):

Max. output level 1 Vp-p, unbalanced, 

Sync. negative load impedance 

75 ohms

COMPONENT VIDEO OUT:

Y: 1 Vp-p, 75 ohms

Pb/Cb: 0.7 Vp-p, 75 ohms

Pr/Cr: 0.7 Vp-p, 75 ohms

S VIDEO OUT (4-pin/mini-DIN jack):

Y: 1 Vp-p, unbalanced, Sync. negative

C: 0.286 Vp-p, load impedance 

75 ohms

PHONES (stereo mini jack):

accepts headphones of 8 ohms or 

more