Sony CMT-CQ1 사용자 설명서
14
GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
provided with each component.
A PC/MD/TAPE OUT jack
Use an audio cord (not supplied) to connect an
optional component (MD deck, etc.) to this jack.
You can then output sound to that component
from this system.
optional component (MD deck, etc.) to this jack.
You can then output sound to that component
from this system.
B PC/MD/TAPE IN jack
Use an audio cord (not supplied) to connect an
optional component (MD deck, etc.) to this jack.
You can then listen to the sound from that
component through this system.
optional component (MD deck, etc.) to this jack.
You can then listen to the sound from that
component through this system.
C PHONES jack
Connect headphones to this jack.
Listening to audio from a
connected component
connected component
1
Connect the audio cord.
See “Hooking up optional components” on
page 14.
See “Hooking up optional components” on
page 14.
2
Press FUNCTION repeatedly until “PC” (or
“MD” or “TAPE”) appears.
“MD” or “TAPE”) appears.
3
While pressing and holding
x
on the unit,
press
?/1
on the unit repeatedly until the
desired sound source (“PC”, “MD” or
“TAPE”) appears.
Start playing the connected component.
“TAPE”) appears.
Start playing the connected component.
Recording on a connected
component
component
Making an analog recording
1
Connect the audio cord.
2
Start recording.
Refer to the operating instructions provided
with connected component.
Refer to the operating instructions provided
with connected component.
Optional Components
Hooking up optional components
From the audio
output jacks of an
optional analog
component
output jacks of an
optional analog
component
Optional analog component
To the audio input
jacks of an optional
analog component
jacks of an optional
analog component
Optional analog component
Headphones